点击图片查看原图采用上圆刀下平刀，切断PCB板时不脱丝，切口整齐，切板走刀速度0-500可调节，刀轮走刀行程0-356/500mm（长度可订做）。适用于各种PCB板厚度，上下刀材质为SKH-11进口高速钢，耐用，可反复研磨使用，可配加传输带，将板自动送出，平台可升降，降低应力，保证板的质量，光幕布安全装置十护刃双重安全保障，可加装亚克力防护罩，避免人员受伤。
Using the upper round cutter and the lower flat knife, the PCB board can be cut without wire shedding, and the incision is neat. The cutting speed is 0-500 mm, and the cutter wheel travel is 0-356 / 500 mm (length can be customized). It is suitable for all kinds of PCB thickness. The upper and lower knives are made of skh-11 imported high-speed steel. It is durable and can be grinded repeatedly. It can be equipped with transmission belt to automatically send the board out. The platform can be lifted and lowered to reduce the stress to ensure the quality of the board. The light curtain safety device and the double protection blade can ensure the safety of the board. The acrylic protective cover can be installed to avoid personal injury.
走刀式自动分板机的特点：
The features of the automatic cutting machine are as follows
1、四个可选择之分板速度由控制板旋扭设定，分板行程可自由设定并有LCD显示。
The four optional sub board speeds are set by the control board knob, and the plate travel can be set freely and displayed on LCD.
2、切板过程中PCB不动，圆刀滑移，确保基板电子组件不因移动而埙坏。
During the cutting process, the PCB does not move and the circular knife slides to ensure that the electronic components of the substrate will not be damaged due to the movement
3、可解决零件跨越V槽来实现分板。
It can solve the problem that the parts cross the V-groove to realize the plate division.
4、因应V槽深浅及刀具埙耗，上圆刀与下直刀之间的距离可准确调整。
According to the V-groove depth and tool wear, the distance between the upper round cutter and the lower straight knife can be accurately adjusted.
5、安装防切手指电子眼保护装置，避免人为不当时的伤害。
The electronic eye protection device is installed to avoid accidental injury.
6、将切板时所产生的内应力降至 低而避免锡裂。
The internal stress caused by cutting plate is minimized to avoid tin crack.
7、根据客户生产效率情况，可依要求加装输送带。
According to the production efficiency of customers, the conveyor belt can be installed according to the requirements.
8、以直线式滚动性压迫性切断V槽各式PCB板，彻底防范焊点的损伤和断裂。
Various types of PCB and V-groove are cut to prevent the solder plate from being damaged completely.